Lifting Pin Eye Anchors

  1. Products
  2. Lifting And Handling
  3. Lifting Pin System
  4. Lifting Pin Eye Anchors
Sort By: Featured

Lifting Pin Eye Anchors

Eye anchors (OS-EA family) are single-piece forged anchors with an integrated lifting eye at the top — they connect directly to a shackle or crane hook without a dedicated lifting clutch. That makes them the cost-efficient choice for high-volume precast production, mass casting yards, and applications where clutch cycle time matters. OCS stocks eye anchors from 1T through 8T, hot-dip galvanized for corrosion resistance, and manufactured to meet OSHA 29 CFR 1926.704.

20T Eye Anchor
Item#: OS-EA-20.0T-250
$ 17.64 17.64 USD
L - Length : 9-7/8”
Weight (lbs) : 7.23
Size : 20.0T
Anchor Ultimate Mechanical Load in Tension (lbs) : 160,000
FW - Foot Width : 3-5/16”
HD - Head Diameter : 2-3/4”
D - Hole Diameter : 1-9/16”
Tension w/ rebar (lbs) : 40,000
RD - Rod Diameter : 1-9/16”
8T Eye Anchor
Item#: OS-EA-10.0T-180
$ 6.98 6.98 USD
L - Length : 7-1/16”
Weight (lbs) : 2.71
Size : 8.0T
Anchor Ultimate Mechanical Load in Tension (lbs) : 64,000
FW - Foot Width : 2-3/8”
HD - Head Diameter : 1-7/8”
D - Hole Diameter : 1-1/8”
Tension w/ rebar (lbs) : 16,000
RD - Rod Diameter : 1-1/8”
4T Eye Anchor
Item#: OS-EA-5.0T-120
$ 3.17 3.17 USD
L - Length : 4-3/4”
Weight (lbs) : 0.90
Size : 4.0T
Anchor Ultimate Mechanical Load in Tension (lbs) : 32,000
FW - Foot Width : 1-11/16”
HD - Head Diameter : 1-7/16”
D - Hole Diameter : 7/8”
Tension w/ rebar (lbs) : 8000
RD - Rod Diameter : 3/4”
2T Eye Anchor
Item#: OS-EA-2.5T-90
$ 1.58 1.58 USD
L - Length : 3-1/2”
Weight (lbs) : 0.37
Size : 2T
Anchor Ultimate Mechanical Load in Tension (lbs) : 16,000
FW - Foot Width : 1-5/16”
HD - Head Diameter : 1-1/32”
D - Hole Diameter : 9/16”
Tension w/ rebar (lbs) : 4,000
RD - Rod Diameter : 9/16”
1T Eye Anchor
Item#: OS-EA-1.3T-65
$ 0.92 0.92 USD
L - Length : 2-9/16”
Weight (lbs) : 0.14
Size : 1T
Anchor Ultimate Mechanical Load in Tension (lbs) : 8,000
FW - Foot Width : 7/8”
HD - Head Diameter : 3/4”
D - Hole Diameter : 3/8”
Tension w/ rebar (lbs) : 2,000
RD - Rod Diameter : 3/8”